CONDENSATORI - Jensen

 Audio signal capacitors
Ultimate quality paper in oil capacitors made with aluminium, copper or silver foil for the signal path of high end audio equipment.

High quality mineral oil impregnated paper capacitors with metal foil.
Preferred voltage ranges: 630, 1000 VDC
Electrodes: Aluminium (as standard) tin, copper or silver foil, extended foil construction.
Construction: Axial performance, hermetically sealed in aluminium tube (copper, brass or porcelain encasing is also available on request). The terminal leads - available in tinned copper or pure silver - ­ are solder-sealed to eyelets in the end-discs. The capacitor element is insulated from the tube.
The terminal which is contacted the outer foil (the foil which is the closest to the can) is always marked with an vertical line on the marking.
The capacitors are supplied with an insulation sleeve, but in applications where the sleeve distorts the sound we can deliver capacitors without sleeve.
Capacitance tolerance: C < 0.1 µF : -20/+30%
C > 0.1 µF : -10/+20%
10% tolerance and special tolerances are available on request.
Operating temperature range: -40/+85°C
Max. ripple voltage: The sum of the peak ripple voltage and the applied DC voltage should not exceed the DC rating of the capacitor.
Power factor (loss factor) : tg < 0.008 at 1 kHz
Test voltage: 3 x Un between terminals and between terminals and container.
Lifetime test: 250 hours at the maximum category temperature and 2 x Un, according to IEC 80 § 21.
 

Aluminium foil Paper in oil Capacitors
Value	Voltage DC	Construction	Size	Price EURO each
0,01 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	9mm x 21mm	14.50
0,015 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	11mm x 21mm	15.00
0,022 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	11mm x 21mm	15.00
0,033 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	11mm x 32mm	15.50
0,047 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	14mm x 33mm	18.20
0,1 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	16mm x 33mm	18.70
0,15 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	16mm x 43mm	19.20
0,22 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	19mm x 52mm	20.30
0,33 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	22mm x 52mm	20.80
0,47 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	25mm x 52mm	21.80
0,68 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	25mm x 71mm	22.80
1,0 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	30mm x 71mm	23.40
1,5 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	35mm x 75mm	24.40
2,0 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	40mm x 75mm	25.50
2,2 µF	630 V	Aluminium tube, Axial, Tinned Copper lead out	40mm x 75mm	26.00

 Speaker/Crossover filter capacitors
Mineral oil impregnated metal film or metallized paper capacitors for crossover network filters for the finest loudspeakers.

High quality mineral oil impregnated paper capacitors with aluminium foil electrodes, axial performance for crossover filters in loudspeaker systems.
Electrodes: Zink-metallized paper
Construction: Type MPA are metallized capacitors of high quality, impregnated under high vacuum. Hermetically sealed in aluminium tubes with axial tinned copper leads. If dielectric faults should develop due to conducting particles, or if a momentary surge of voltage should puncture the dielectric, self-healing property functions to clear and isolate the fault. The capacitor then continues to operate normally in the circuit without interruption. Radial performance in aluminium can are available on request.The capacitors are supplied with an insulation sleeve, but in applications where the sleeve distorts the sound, we can deliver without sleeve.
Capacitance tolerance: C < 1 µF : -10/+20%
C > 1 µF : -10/+10%
5% tolerance and special tolerances are available on request.
Operating temperature range: -40/+85°C
Max. relative humidity: 95%
Max. ripple voltage: The sum of the peak ripple voltage and the applied DC voltage should not exceed the DC rating of the capacitor.
Power factor (loss factor) : tg < 0.008 at 1 kHz
Test voltages: Terminal to terminal and terminals to container 1.5 x Un.

 Electrolytic capacitors
Jensen's AudioGrade electrolytic capacitors are made for the audiophiles who don't want to compromise the electrolytic capacitor quality either. Our philosophy is ultimate performance and as a consequence of manufacturing high quality capacitors for the primary signal path we have also developed a range of electrolytic capacitors mainly for use in power supply of solid state and tube high end audio equipment.
The AudioGrade electrolytic capacitors have been developed and manufactured with special attention to their effect on the sound.
Combining our more than 35 years experience with intensive listening tests a lot of improvements have been achieved compared to the traditional long life electrolytics: Extra fine fiber mixture paper tissue, special electrolyte liquid, low etched anode and cathode foil with unique pore structure, ultra compact construction to minimize microphony.

 High voltage dual section electrolytic capacitors  
Construction : High voltage, polarised aluminium electrolytic capacitor encased in a cylindrical aluminium case. The capacitor is designed for central mounting M18 X 1,5. Connection by means of solder tags. Negative pole on the can. M18 nuts for fastening are standard, while insulation and contact ring with solder tag for the negative pole are optional.
Application: Filtering and smoothing and energy storage in the power supply of high end vacuum tube and guitar amplifiers.
Capacitance tolerance: -10/+30 %
Leakage current: 0,4 x C [µF] in mA at 20°C and rated voltage after 5 min. Operational leakage current is less than 20% of the above after 1 h or longer.
Temperature range: -40 to +85°C
Rated voltages: 500 VDC (Working Voltage), 550 V (Surge Voltage).

 High voltage electrolytic capacitors
Construction : High voltage, high capacitance, polarised aluminium electrolytic capacitor encased in cylindrical aluminium case. The capacitors are fully insulated and furnished with pressure relief and M5 screw terminals.
Application: High energy discharge. Filtering and smoothing in the power supply of high end vacuum tube amplifiers.
Capacitance tolerance: -10/+30 %
Leakage current: 0,4 x C [µF] in mA at 20°C and rated voltage after 5 min. Operational leakage current is less than 20% of the above after 1 h or longer.
Temperature range: -40 to +85°C
Rated voltages: 500 VDC (Working Voltage), 550 V (Surge Voltage).

 OFFERTA SPECIALE

Audio Capacitor:
Oil impregnated Metallized paper
Radial construction
8 mm stud for fixation and two solder terminals
Size: Ø 30 x 45 mm
Value: 0,5 uF, 1000 VDC
Euro 7,30 each